RSX Motorsports ABS Kit

Optimal Braking Performance...

...in any situation

Our new CES RSX motorsports ABS unit, based on our high-performance MK100®, has been designed for all types of racing vehicles. Our new software approach provides the best braking performance in-class outperforming our competitors on bumpy courses such as the Nurburgring Nordschleife section. 

Included with the kit is the IMU (6-DOF), an additional pressure sensor, mode switches, and all required connectors.

RSX Motorsports ABS Kit

The RSX ABS is engineered to perform in motorsports on closed test and racing tracks only.

With the origin in the series product, the MK100® is the proven in use electronic brake system from Continental. For the use in motorsports vehicles the MK100® setup is chosen according to the special needs in this area, as front/rear brake circuit split in combination with a balance bar.

Previous
Next

The CES RSX motorsports ABS is not intended to be used on public roads.
It must only be used on race tracks or private property.

Performance

Shortest braking distances in any situation. Optimised settings enhance performance and result in faster laptimes.

All Drivetrains

Suitable for all kinds of drivetrain. No matter if Front-, Rear- or All-Wheel Drive. (All-Wheel Drive in future via Firmware-update)

ABS

Based on the world-wide renowned and well-proven Continental MK100® ABS-System.

Installation

Easy installation through bespoke wiring harness and utilisation of existing wheel speed sensor architecture. Diagnosis-Interface included in the Kit

Motorsports

Software optimized for motorsports to ensure the highest level of performance and safety.

Support

CES Support is there to help you with any problems. Whether by phone, email or on site.
We are there when you need us.

Universally adjustable

Thanks to the different adjustable in-cockpit settings, the driver can always rely on the system, no matter what the road conditions are.

Individual configuration

Suitable for all kinds of drivetrain. No matter if Front-, Rear- or All-Wheel Drive. (All-Wheel Drive in future via Firmware-update)

System Overview

  • ABS unit assembly (HECU)
  • Weight: 1990 g
  • Dimensions: 154 x 105 x 111 mm³

Software Functions included with Kit

  • Racing ABS (Anti-lock Braking System), tuned to maximum performance under racing conditions
  • Selection of 12 modes (max. stability … performance)
  • Independent function-OFF-switch
  • The setting of vehicle parameters by the usage of a set-up tool

Software Functions with CES Custom Brake Application

  • Racing Torque Vectoring optionally
  • Racing AYC (Active Yaw Control) optional
  • And much more…

Electronic Control Unit (ECU) – Outputs:

  • 1x Vehicle CAN Interface (adjustable to 500kBit/s or 1Mbit/s)
    • Wheel Speeds (FL, FR, RL, RR)
    • Accelerations (X, Y, Z; -5g … +5g)
    • Angular rates (X, Y, Z; -156°/s … +156°/s)
    • Brake circuit pressures (Front, Rear)
    • Function activation flags
    • Mode selection states
    • Function disable flags
    • Warning lamps
  • Hardwired outputs
    • Warning lamps
    • Vehicle speed
    • Brake light

Electronic Control Unit (ECU) – Inputs:

  • 1x Private CAN Interface
    • Steering Wheel Angle Sensor
    • Inertial Measurement Unit (IMU)
  • 4x Active Wheel speed sensors (not included)
  • 1x External brake pressure sensor
  • 1x 12-Position rotary switch (mode selection)
  • 2x Push button switch (function disabling, not included)

Hydraulic Control Unit (HCU)

  • Brake circuit split: Front/Rear
    • allows the usage of brake balance bars
  • Unit will be delivered pre-filled
    • No complex fill & bleed procedure necessary
    • Conventional bleeding of the brake system is sufficient

Kit content

  • RSX Pre-Filled Hydraulic Electronic Control Unit (HECU)
  • Inertial Measurement Unit (IMU)
  • External Pressure Sensor
  • One 12 position rotary switch
  • Three electrical connectors for IMU, ECU and external pressure sensor
  • SW Configuration tool
  • Installation and user manual
Previous
Next

Benefits

Our CES RSX Motorsports ABS system is designed for front-rear split applications. The system offers one internal and an additional external pressure sensor, which enables capturing the exact pressure on both brake circuits even if a brake balance bar is in use. The result is more accurate control performance.

A configuration tool is included in the kit which enables you to customize the parameters to suit your target vehicle.

The HCU is provided pre-filled to enable easy rapid integration and save you the trouble and complexity of bleeding the brake system.

Provides configuration support for third-party (only class-III type supported) steering wheel angle sensor or Electric Power Steering (EPS) systems.

An additional external pressure sensor is also included.

Why us?

Continental has decades of experience in the field of designing and integrating Brake Systems.

Continental Engineering Services would be delighted to support you to equip your vehicle with our state of the art brake system.

If you are interested in discussing brake customizations, applications, or require brake integration services, please contact us.

CES RSX ABS Manual

Download our RSX Motorsports ABS Manual
Version 1.0
© COPYRIGHT – CONTINENTAL ENGINEERING SERVICES Imprint | Cookie Policy | Sitemap | Legal Notice | Data Protection